arjo Enterprise ENT-ACC02 Mode D'emploi page 5

A clinically qualified person should assess the risks involved before transporting a
patient while IV equipment is in use
When moving the bed, do not allow the IV pole or associated equipment to come into
contact with surrounding objects or people as this may cause injury and/or
equipment damage
Do not use the installed IV pole to move or manoeuvre the bed
When the IV pole is installed, the head end panel should only be removed after
assessment by a clinically qualified person, as the gap between the IV pole and
safety side constitutes a potential entrapment hazard
Do not use the IV pole or hooks to support items or equipment other than fluid bags,
syringe drivers, etc.
ENT-ACC14 Four Hook Adapter (Applicable to ENT-ACC02, ENT-ACC04)
This accessory is attached to the IV pole at right angles to the fixed hooks.
Installation
Ensure the accessory hooks are securely fitted on the IV pole before use.
Remove all equipment from the
IV pole and lower it to minimum
height.
Position the accessory (D) in the
slots on top of the fixed hook
moulding, then push it down as
far as it will go (E).
The maximum Safe Working
Load is the same as for the fixed
hooks (2kg per hook).
WARNING
WARNING
3
English
D
E