To Set The Timer - Panasonic CS-TZ20WKEW Manuel D'utilisation

App Installation To connect network
• For Wireless LAN Module operation setup, please refer to Setup Instructions
Manual.
To maximise comfort while sleeping
SLEEP
• This operation provides you with a comfortable environment while sleeping. It will
automatically adjust the sleep pattern temperature during the activation period.
• The indoor unit indicator will dim when this operation is activated. This is not applicable if
the indicator brightness has been manually dimmed.
• This operation is incorporated with the activation timer (0.5, 1, 2, 3, 4, 5, 6, 7, 8 or 9 hours).
• This operation can be set together with timer. Sleep operation has the priority over OFF
timer.
• This operation can be cancelled by pressing the respective button until the sleep timer
reaches 0.0h.

To set the timer

2 sets of ON and OFF timers are available to turn ON or OFF the unit at different preset time.
1 2
TIMER
ON
TIMER
OFF
1 Select ON or OFF
timer
• Each time pressed:
(exit setting)
2 Set the time
3 Confi rm
Note
SLEEP POWERFUL
,
• Can be selected at the same time.
• Can be activated in all modes.
• Can be cancelled by pressing the
respective button again.
ACXF55-27151.indb 17 ACXF55-27151.indb 17
3
Example:
OFF at 22:00
TIMER
OFF
2
SET
See "To learn more..." for details.
• To cancel ON or OFF timer, press
or to select respective
TIMER
OFF
press .
CANCEL
• If timer is cancelled manually or due to
power failure, you can restore the timer
again by pressing
TIMER
ON
respective or then press
• The nearest timer setting will be displayed
and will activate in sequence.
• Timer operation is based on the clock set
in the remote control and repeats daily
once set. For clock setting, please refer to
Quick Guide.
FAN SPEED/
POWERFUL
,
• POWERFUL, QUIET and FAN SPEED
cannot be selected at the same time.
TIMER
ON
or then
or to select
TIMER
OFF
.
SET
17
12/2/2019 10:07:43 AM 12/2/2019 10:07:43 AM