List of Materials
Parts supplied
•
Blower unit housing
•
Hood canopy
•
Stainless steel mesh filter
•
Halogen light bulb x 4
•
Upper and lower Duct covers x 4
•
Chimney structure
•
Hardware Packet:
Allen Wrench
Template
Use, Care and Installation Guide
Warranty
Nuts x 12
7x45 screws x 6
4 x 6 screws x 12 (To assemble duct covers)
3,5x6,5 screws x 13 (11 to assemble Hood canopy to
Chimney structure + 2 to attach duct covers to chimney
structure)
3,5x9,5 screws x 24 (To attach one to another brackets
and blower unit)
CAUTION
To reduce the risk of fire and electric shock, install this rangehood only with integral blowers mod. EBI-600 rated 120V 60Hz
450W or with remote blowers mod. EBN-1100 rated 120V 60Hz 900W, manufactured by Elica.
Dimensions and Clearances
Parts not supplied
•
Duct, conduit and all tools required for installation.
•
Ductless Recirculating Kit
To be used only in the Ductless (Recirculating)
version
includes: charcoal filter, charcoal filter support and
fixing bracket, deflector
•
Internal blower
To be used only in case of Internal blower installation.
•
In-line blower
To be used only in case of in-line blower installation
•
Noise reduction sponge
Note: may be already included on internal/in-line blower
package.
5