List Of Materials; Parts Not Supplied - Elica Professional Série Guide D'utilisation, D'entretien Et D'installation

LIST OF MATERIALS

Removing the packaging.
I CAUTION
Remove carton carefully, Wear gloves to protect against sharp edges.
I WARNING
Remove the protective film covering the product before putting into operation.
Supplied Part
Hood assembly and
LED lamps already installed
5x45 mm
4.2x8 mm
3.5x9.5 mm
3.5x6.5 mm
6x16 mm
Leveling screws
Duct cover brackets
Tools/Materials required
• Level
• Drill
• 1 ⁄ " (3.2 cm), ⁄ " (3.2 mm), and
1 1
4 8
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Jigsaw or keyhole saw
• Metal snips
• Screwdrivers:
- Flat-blade
- Phillips
Pieces
1
4
60
2
6
4
2
4
Parts no supplied
⁄ " (4.8 mm) drill bits
1
16
Supplied Part
Lower and upper duct covers
8" round air transition
Torx adapter
Vertical supports
Horizontal supports
Mounting template
Parts needed
• Home power supply cable
• 1 - ½" (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
• 1 wall or roof cap
• Metal vent system
Optional accessories and consumable parts
KIT
Long Chimney
Extension
in Line Blower
1200 Kit
External Blower
1200 Kit
Pieces
Upper: 2
Lower: 2
1
#10: 1
#20: 1
Upper: 4
Lower: 4
3
1
# Part
KIT0100317
KIT0154387
KIT0153054
5