List Of Materials; Supplied Parts; Partos Not Supplied - Elica ETB430S3 Guide D'utilisation, D'entretien Et D'installation

List of Materials

Removing the packaging.
I CAUTION
Remove carton carefully, Wear gloves to protect against sharp
edges.
Supplied Part
Hood assembly and LED lamps already installed
5 x 45 mm
5.4 x 75 mm
3.5 x 9.5 mm
4 x 8 mm
Torx 10 adapter
Tools/Materials required
• Level
• Drill
• 11⁄4" (3.2 cm), 1⁄8" (3.2 mm), and 1⁄16" (4.8 mm) drill bits
• Pencil
• Wire stripper or utility knife
• Tape measure or ruler
• Pliers
• Caulking gun and weatherproof caulking compound
• Jigsaw or keyhole saw
• Metal snips
• Screwdrivers:
• Flat-blade
• Phillips
I WARNING
Remove the protective film covering the product before
putting into operation.

Supplied Parts

Pieces
1
6
4
2
4
1

Partos not supplied

Parts needed
• Home power supply cable
• 1 - ½" (12.7 mm) UL listed or CSA approved strain relief
• 3 UL listed wire connectors
• 1 wall or roof cap
• Metal vent system
Optional accessories
Recirculating Kit
Long Chimney Extension
Charcoal Filter
Replacement
Grease Filter
Replacement
Make Up Air Kit
Supplied Part
Duct covers
6" round air transition
8 x 40 mm
10x60 mm
Duct cover bracket
Mounting template
KIT
30" (76.2 cm)
KIT0168380
KIT02785
KIT0168383
GRI00009219B
KIT0148906
Pieces
2
1
2
4
1
1
# Part
36" (91.4 cm)
5