Installing Filters - Winix ZERO-N Manuel D'utilisation

INSTALLING FILTERS

This product comes with all required filters. The protective plastic wrap must be
removed from the filter before use.
※ Operating the unit without removing the plastic wrap may result in product
failure.
※ Unplug and make sure the unit is turned off before installing filter.
Remove the front panel by pressing down
①
on both edges of the front and gently
pulling it toward the front.
Press on the Pre-filter tabs near the top of
②
the filter, release and remove.
Remove the carbon filter from the filter case.
③
English ZERO-N
6