Connecting Data; Guarantee And Liability - Grammer LINEA Manuel D'utilisation

Connecting data

•
If you need to connect cables to the vehicle supply network, strictly observe the following
instructions:
Before you connect a seat heater, you must obtain the relevant electrical data for the
respective vehicle with reference to voltage, protection and the kind of connections from the
manufacturer, from
For safety reasons, the installation and connection to the vehicle supply network must be
carried out by authorized specialist personnel only.
The seat connections must be protected independently of other vehicle components.
24V DC 10A
•
For pneumatic connection, the following data have to be observed:
Max. 10 bar / Min. 6,5 bar
•
For establishing an electrical connection, select an electric circuit by means of which the
electric loads and components of the driver's seat are separated from the live network when
G u ar antee and l iab il ity
•
AG does not disclaim any guarantee or liability for damage resulting from
incorrect assembly, use or repair of the driver's seats.
•
Further details on the claims admitted by
documents (see invoice or delivery note). Claims against
claims described in those documents are excluded.
Subject to design, technical and equipment modifications as well as homologation regulations.
20
AG or the company's agencies.
Supply air = black / Exhaust air = grey
.
AG are stated in your contractual
AG other than the
GB