Operation Of Mc 1500 Memory Controller; A/B Unit Selector Key - SCHOTT VisiLEDs MC Serie Conseils D'utilisation

The MC 1500 memory controller makes it possible to control up to two LED
illuminations (A and B). In order to keep the control panel clearly arranged
and compact separate operational controls for each unit A and B have been
dispensed with. A changeover button takes their place:
By pressing the unit selector key (1) the MC 1500 operating controls are
routed to VisiLED unit A or B. The green LED indicators above key (1) display
which of the two illumination units (A or B) has been selected.
Only the selected VisiLED unit (A or B) can be set by the MC 1500 operation
●
controls! This applies to the segment setting (3), the light intensity setting
(5), the rotation setting (6) and the key (9) "Strobe on/off".
● The LED displays (2) and (4) on the MC 1500 control panel show the set-
tings for the selected illumination unit only! The segment mode and the in-
tensity setting of VisiLED unit A and B cannot be read off concurrently, but
rather successively – by repeatedly pressing the key (1).
● The illumination is not changed by solely pressing the selector key (1). In
particular the light of the VisiLED units is not switched on or off!
Synchronized rotation (see Section 7.4):
● "Rotation of mixed light" and setting of "rotation speed"
Memory area (see Section 7.5)
● "Storage of mixed light" and "Calling-up mixed light"
● If just the storage of light from one of the two LED illuminations (A or B) is
required then the second LED unit should be dimmed down to intensity 0.
Thermo guard (see Section 7.6)
● The thermo guard (8) continuously controls the temperature in each illumi-
nation unit and reacts if the permitted temperature is exceeded – irrespec-
tive of the setting of key (1).
Strobe mode (see Section 7.7)
● Setting of "Strobe frequency" and "Strobe pulse duration"
● In this way "synchronized strobing" is guaranteed if both LED illuminations
are in strobe mode! Individual activation/deactivation of the strobe mode
using key (9) is possible for each LED illumination (see above).
Trigger mode (see Section 7.7)
● "Trigger mode on/off" and "Trigger delay time" (time between trigger
pulse and light pulse)
7. Operation of MC 1500
memory controller

7.1 A/B unit selector key

Please note
All other MC 1500 settings affect both
illumination units
VisiLEDs MC Serie | 43
GB