SCHOTT VisiLEDs MC Serie Conseils D'utilisation page 61

Properties Values
Light % 0–100
intensity setting
MC 1500
brightness ranges:
1 = No LED lit up 0–1
2 = One green LED 2–32
3 = Two green LEDs 33–59
4 = Two green and 60–82
one yellow LED
5 = Two green, one 83–100
yellow and one
red LED
Rotation mode
Angle of single 45°
rotation step
illumination time 2–500
of each step *
➔ Rotation speed* ➔ 0.25–62.5 rps
Strobe mode
Strobe cycle µs 100–65000,
duration (full intensity from on 500 µs)
➔ Strobe frequency ➔ strobe frequency 15–2000 Hz
(10000 Hz)
Strobe pulse µs 80–65000
duration
Strobe % 0–100 without overdrive
intensity* 0–300, if overdrive conditions fulfilled
(see Section 7.7)
Trigger mode
Light pulse µs 80–65000
duration
Light pulse 0–100 without overdrive
intensity* 0–300, if "pulse duration < 10000 µs"
Delay time* ms 0–16000 (only limited settings
possible via controller keypad)
Flash mode
Flash µs
duration 80–65000
Tested in Parameter setting for MC 1500
accordance
with
Base setting
32 %
125 ms
➔ 1 rps
Deactivated
40000
➔ 20 Hz
2500
300
Deactivated
2500
Precise setting of the parameters only
300 by computer control of the MC 1500.
The MC 1500 controller's keypad only
1000 allows rough visible adjustment.
* The values indicated with * can
only be changed via computer .
➔ The values indicated with ➔ are
derivative values that cannot be
2500 directly set.
GB
VisiLEDs MC Serie | 59