Vibration Function - Sony PlayStation 2 Mode D'emploi

14
Playing a game (continued)
When not intending to play a game for an
extended period of time
Turn the power off at the main power switch
on the console rear and disconnect the power
plug from the electrical socket.
Changing from one game to
another
There is no need to turn off the console when
you want to change games.
1
Press the A (open) button.
The disc tray opens.
2
Remove the disc.
3
Place a new disc in the disc tray.
4
Press the A button.
The disc tray closes.
5
Press the 1 (standby)/reset
button to reset.
(Note: holding the 1/reset button
down for any length of time may
cause the console to go into standby
mode.)
After the start-up screen, screen 2 or
3 is displayed and the game begins.
Note
With a multi-disc game, follow steps 1 through 4 to switch
discs. Refer to the software manual for details.
Using the analog controller
(DUALSHOCK 2)
®
•The analog controller (DUALSHOCK
be used with PlayStation 2 and PlayStation
®
format software.
•You can switch between digital and analog
modes. When the controller is in analog
mode, the following buttons and sticks may
operate in analog fashion depending on the
features supported by the software title. Refer
to the software manual for details.
PlayStation 2 format software
®
Directional buttons, ¢ , a , ✕ , s buttons, left
analog stick, right analog stick, L1, R1, L2, R2
buttons
PlayStation format software
®
Left analog stick / right analog stick
•You can use the vibration function.
Using the analog controller
(DUALSHOCK ) (sold separately)
®
•The analog controller (DUALSHOCK
also be used with PlayStation
PlayStation format software.
®
Digital mode (indicator: off)
L2 button
5
L1 button
SELECT
button
1,4
2,3
Directional
buttons
ANALOG mode button
• You can switch between digital and analog
modes. When in analog mode, you can enjoy
the analog operation of the left analog stick
and right analog stick.
2) can
®
PlayStation 2 format software
®
®
Left analog stick / right analog stick
PlayStation format software
®
Left analog stick / right analog stick
• You can use the vibration function.
Mode switching and the mode
indicator
The analog controller (DUALSHOCK
switched between two modes by pressing the
analog mode button.
Each time the analog mode button is pressed,
the mode changes as follows:
Digital mode (indicator: off)
Xx
Analog mode (indicator: red)
Note
) can
®
Switch to the appropriate mode for use.
2 and
®
Note, however, that some software makes this adjustment
automatically. In such cases, the analog mode button is
overridden by the software. For details, refer to the
software manual.
R2 button
R1 button
START
button
¢ button
a button
✕ button
s button
Mode indicator: Off

Vibration function

The analog controller (DUALSHOCK
features a vibration function when the function
is supported by the software title. The vibration
function can be set to ON or OFF on the
software option screen.
Notes
• When the analog controller (DUALSHOCK
being used, turn the console off or unplug the
controller from the console.
• Before using the vibration function, please read "Notes
on safety when using the analog controller
(DUALSHOCK
®
2) can be
®
Before using the analog
controller (DUALSHOCK
After turning the console on, rotate the left and right
analog sticks once with your thumbs before starting a
game. Do not twist the analog sticks, but rotate as if
drawing a circle as shown in the diagram above.
Analog mode (indicator: red)
L2 button
L1 button
SELECT START
button button
Directional
buttons
Left analog stick /
L3 button*
ANALOG mode button
* The R3 and L3 buttons function when the sticks are pressed.
2)
®
2) is not
®
2)" on page 3.
2)
®
R2 button
R1 button
¢ button
a button
✕ button
s button
Right analog stick /
R3 button*
Mode indicator: Red