Identification Of Components; Safety Devices - Comet ETM Serie Notice Technique - Utilisation Et Entretien

EN
TECHNICAL CHARACTERISTICS AND SPECIFICATIONS
ELECTRICAL CONNECTIONS
Power supply
Input
Fuse
HYDRAULIC CONNECTION
Maximum water supply temperature
Minimum water supply temperature
Minimum water supply flow rate
Maximum water supply pressure
Maximum priming depth
PERFORMANCES
Max. flow rate
Maximum pressure
Reaction force on the gun
Sound pressure level - Uncertainty (*)
Sound power level
Operator arm-hand system vibration - Uncertainty (*)
WEIGHT AND DIMENSIONS
Length x Width x Height
Weight
(*) Measurements taken in compliance with EN 60335-2-79
The characteristics and specifications are guidelines only. The manufacturer reserves the right to make all modifications to the
equipment deemed necessary.
Refer to figures 1, 2, 3 and 5.
1. Master switch
2. Transport grip
3. Warning plate. Informs about residual risks: not
to be used to wash people, animals, electrical
apparatus and the high-pressure cleaner itself.
Warns that the machine is unsuitable for connecting
up to the drinking water mains (to connect up to the
water mains, a
required which can be purchased from your dealer).
4. Power cable
5. Oil level indicator (ETM 130)
6. Pressure adjustment knob
7. Water outlet connection
8. Identification plate. Shows the serial number and
main technical specifications.
9. Spray gun
10. Lance hose
11. Nozzle holder head
• Ampere cut-out protection device.
14
This device stops the high-pressure cleaner operation in the event of excessive power absorption.
WARNING

IDENTIFICATION OF COMPONENTS

type mains disconnector will be
BA
TRANSLATION OF THE ORIGINAL INSTRUCTIONS
Read and keep in mind that indicated in the
INSTRUCTION MANUAL - SAFETY WARNINGS.
700 l/h - 185 US gph
480 l/h - 127 US gph
470 x 260 x 370 mm - (18,5 x 10,2 x 14,6 in)
12. Nozzle cleaning pin
13. High-pressure hose connection
14. High-pressure hose
15. High-pressure hose quick coupling
16. External detergent suction hose filter
17. External detergent suction hose
18. Spray gun lever safety stop
19. Spray gun lever
20. Water inlet connection
21. Water inlet filter
22. Water inlet quick-fit connection seal
23. Water inlet quick-fit connection
24. External tank detergent suction coupling
25. Elastic clamp for fastening the detergent suction
hose
type water mains disconnector (not supplied)
26.
BA
27. "Priming" device (ETM 130)

SAFETY DEVICES

ETM 100 M
230 V - 1~ 50 Hz
2,3 kW
16 A
60 °C - 140 °F
5 °C - 41 °F
900 l/h - 238 US gph
0,8 MPa - 8 bar - 116 psi
1,5 m - 4,9 ft
720 l/h - 191 US gph
13 MPa - 130 bar - 1885 psi
25 N
82,2 dB(A) - 0,8 dB(A)
96 dB(A)
2,3 m/s
- 0,24 m/s
2
23 kg - 51 lb
ETM 130 M
2,9 kW
32 N
2
27 kg - 60 lb