Invacare PATRIOT Manuel D'entretien page 25

PATRIOT
Caster Headtube, Front Caster, Axle Mounting Bracket Positioning and Cam Position for
24-inch Rear Wheels and 6-inch Front Casters (FIGURES 1-3)
If changing the seat-to-floor angle to 6
Refer to the following chart to determine the obtainable seat-to-floor height and seat angle combina-
tions for 24-inch rear wheels and 6-inch front casters:
SEAT-TO-FLOOR
HEIGHT OF
17-1/2-inches
17-1/2-inches
16-1/2-inches
AXLE MOUNTING BRACKET
FORWARD REARWARD
(STANDARD) (AMPUTEE)
FIGURE 1 - SEAT-TO-FLOOR HEIGHT OF 17-1/2-INCHES AND A SEAT ANGLE OF 0
AXLE MOUNTING BRACKET
FORWARD REARWARD
(STANDARD) (AMPUTEE)
FIGURE 2 - SEAT-TO-FLOOR HEIGHT OF 17-1/2-INCHES AND A SEAT ANGLE OF 3
AXLE MOUNTING BRACKET
FORWARD REARWARD
(STANDARD) (AMPUTEE)
FIGURE 3 - SEAT-TO-FLOOR HEIGHT OF 16-1/2-INCHES AND A SEAT ANGLE OF 0
*WARNING
o
SEAT ANGLE
WITH A
CASTER HEADTUBE
LEADING TRAILING
CASTER HEADTUBE
LEADING TRAILING
CASTER HEADTUBE
LEADING TRAILING
25
, anti-tippers MUST be installed.
OF FIGURE
o
0 Refer to FIGURE 1
o
3 Refer to FIGURE 2
o
0 Refer to FIGURE 3
FRONT CASTER
FRONT CASTER
FRONT CASTER
PROCEDURE 6
CAM POSITION
Notch
0
CAM POSITION
Notch
0
CAM POSITION
Notch
0
P
A
T
R
I
O
T