Handling And Use; Switching The Appliance On/Off; Emptying The Water Tank - SilverCrest SLE 500 A1 Mode D'emploi

Handling and use

This section provides you with important information on handling and using the
appliance.
Switching the appliance on/off
♦ Plug the connecting plug
♦ Plug the power adapter
♦ Switch the on/off switch
green "ON" LED
♦ Switch the on/off switch
The green "ON" LED
NOTE
► The water tank
appliance cannot be switched on.

Emptying the water tank

The appliance is fi tted with an "auto-stop function" as soon as the water tank
is fi lled with around 370 ml (MAX marking). The appliance then switches off
automatically and the red "Full" LED
♦ Switch the on/off switch
♦ Hold the water tank
the appliance so that water does not spill out.
♦ Pour out the water by using the spout
into the appliance.
NOTE
► The water tank
appliance cannot be switched on.
♦ Switch the on/off switch
The green "ON" LED
SLE 500 A1
into the connection socket
9
into a mains power socket.
10
to position "I" to switch the appliance on. The
3
lights up.
2
3 to the "0" position to switch the appliance off .
goes out.
2
must be fully inserted into the appliance, otherwise the
7
4 lights up.
3 to the "0" position to switch the appliance off .
7 using the front grip recess and pull it carefully out of
8
7 must be inserted fully into the appliance, otherwise the
3 to position "I" to switch the appliance on.
lights up.
2
on the appliance.
6
and push the water tank
GB
7
7 back
43