Fault Rectifi Cation; Malfunction Causes And Remedies - SilverCrest SLE 500 A1 Mode D'emploi

Fault rectifi cation

Malfunction causes and remedies

GB
Defect
The appliance
will not switch
on.
The appliance
produces no
or very little
condensate.
44
This section contains important information on fault localisation and rectifi cation.
WARNING
Observe the following safety information to avoid risks and property damage:
► Repairs to electrical appliances may only be carried out by specialists trained
by the manufacturer. Improper repairs can pose considerable risk to users
and can cause damage to the appliance.
The following table will help with localising and remedying minor malfunctions:
Possible cause
The power adapter
plugged in.
The mains power socket is not
supplying power.
Safety stop due to missing or
incorrectly inserted water tank
The water tank
7
The air intake opening
air outlet opening
covered.
Windows and doors in the room
are open.
NOTE
► If you cannot solve the problem with any of the aforementioned methods,
please contact the Customer Service department.
Rectifi cation
is not Plug the power adapter
10
mains power socket.
Check the house fuse.
Ensure the water tank
7 .
correctly.
Empty the water tank
is full.
it into the appliance.
Ensure that the air intake and outlet
5 or the
openings (
is soiled or
free of blockages.
Close the windows and doors.
into the
10
is inserted
7
7 and reinsert
5 + ) are clean and
SLE 500 A1