Nedo X-Liner 360 2 green Mode D'emploi page 12

4 Structure of the Instrument
Mounting the X-Liner 360 2 green on the tripod
1
Position the
X-Liner 360 2 green on the tripod.
Removing the X-Liner 360 2 green from the tripod
1
Press down the release button on
the tripod and keep it pressed. Then
push the X-Liner 360 2 green away
from the release button.
X-Liner 360 2 green
2
Ensure that the clops are positioned
X-Liner 360 2 green.
2
Push until the clips are undone
OPERATING INSTRUCTIONS
correctly on the
again.
3
Push the
X-Liner 360 2 green in the direction
of the tripod release button until the
X-Liner 360 2 green latches into
position on the tripod.
3
Remove the
X-Liner 360 2 green from the tripod.
EN
12