Software Updates; Unregistering Your Thermostat; Smart Response Technology - Honeywell RTH9585 Serie Guide De L'utilisateur

Software updates

Honeywell periodically issues updates to the
software for this thermostat. The updates occur
automatically through your Wi-Fi connection. All
your settings are saved, so you will not need to
make any changes after the update occurs.
Updates occur in the early morning. After your
thermostat receives the software, it reboots, briefly
displaying the Honeywell logo. The screen then
shows "Updating software..." with a green progress bar. When the update is complete,
your home screen will appear as usual.
Note:
If you are not connected to Wi-Fi or registered at Total Connect Comfort, you will
not get automatic updates.

Unregistering your thermostat

If you remove the thermostat from your
Total Connect Comfort website account (for
example, you're moving and leaving the
thermostat behind), follow these steps:
1 On mytotalconnectcomfort.com log into
your account.
2 Under My Account, select Edit My Profile.
3 Click the Delete My Account button.
Your thermostat will display an orange button
that says Register Online.

Smart Response Technology

This feature (home use only) allows the
thermostat to "learn" how long the heating/cooling
system takes to reach programmed temperature
settings, so the temperature is reached at the time
you set.
For example: Set the Wake time to 6:00 am, and
the temperature to 70°. The heat will come on
before 6:00 am, so the temperature is 70° by 6:00
am.
Note:
Select Smart Response Technology in the Preferences menu ("Setting
preferences" on page 23).
The message "in recovery" is displayed when the system is activated before a
scheduled time period.
25
69-2715EF—07