Starting A Wash Cycle - Inglis 586 Serie Guide D'utilisation Et D'entretien

STARTING YOUR DISHWASHER

Starting a wash cycle

1. Load the dishwasher. See the "Loading
Your Dishwasher" section.
2. Spin the spray arms. They should turn
freely.
3. Add detergent. See the "Using the
Dispensers" section.
4. Add rinse agent, if needed.
5. Close door firmly until it latches.
Stopping the dishwasher
You can stop your dishwasher anytime
during a cycle. All you have to do is:
• Open the door slightly. Wait for any filling
or spraying action to stop before opening
the door all the way. Close the door to
continue the cycle.
8
6. Run hot water at the sink nearest the
dishwasher until water is hot.
Turn off water.
7. Press a Cycle. If desired, press one or
more Options. The dish-
washer starts filling once you
press a Cycle unless you
select the delay wash cycle.
You may press Options as the
machine is filling.
The indicator glows when a
cycle or an option is selected.
OR
• Press Cancel/Drain. Once pressed, a
2-minute drain starts.