Understanding The Status Indicators - Inglis 586 Serie Guide D'utilisation Et D'entretien

Understanding the status indicators

Washing
The Washing indicator glows at the start of
WASHING
Water Heating
The Water Heating indicator glows when-
ever water is heated
WATER
during a cycle.
HEATING
Rinsing
The Rinsing indicator glows during the last
two rinses of all cycles.
RINSING
Drying
The Drying indicator glows during the
drying portion of each
DRYING DRYING
cycle – even if you select
Air Dry. It turns off at the
end of the cycle. If dishes
are not as dry as you expected when using
Air Dry, either allow longer drying times
(overnight) or do not use Air Dry.
the first fill of any cycle
(except Rinse/Wash
Later) and remains on
until the end of the main
wash.
SETTING THE CONTOLS
Clean
The Clean indicator glows at the end of a
cycle to show that the
CLEAN load is clean. All other
indicators turn off. The
Clean indicator glows
until you open the door or press
Cancel/Drain or any other control pad.
Lock Out
The Lock Out feature lets you lock the
control pads. When the
LOCK OUT LOCK OUT
controls are locked,
you cannot start the
dishwasher.
To lock controls:
• Press and hold Air Dry (about 5 seconds)
until the Lock Out indicator
glows.
AIR DRY
To unlock controls:
• Press and hold Air Dry (about 5 seconds)
until the Lock Out indicator turns off.
19