Using Cancel/Drain; Selecting Cycle Options; Changing A Cycle Or Option - Inglis 586 Serie Guide D'utilisation Et D'entretien

Using Cancel/Drain

Press Cancel/Drain to cancel a cycle.
CANCEL
DRAIN
To cancel a cycle:
• Press Cancel/Drain while the dishwasher
is running to start a 2-minute drain. It will
take a few seconds for the drain to start. If
desired, select a new cycle. (See the
"Changing a cycle or option" section.)

Selecting cycle options

You can press an Option after the dish-
washer starts as long as the cycle is not
past the point that the option is used. For
example, you can press Air Dry any time
before the Drying indicator glows.
After a wash cycle, the dishwasher remem-
bers the options used and uses the same
options in the next wash cycle unless new
options are selected or Cancel/Drain is
pressed.
SCOUR PLUS* option
(on some models)
When SCOUR PLUS is selected the
dishwasher adds heat and
water during several portions
of the Normal, Heavy, and
SCOUR
Pots-N-Pans cycles. The extra
PLUS
heat and water improve wash-
ing results. The cycle will be longer when
you select the SCOUR PLUS option. The
Pots-N-Pans cycle with SCOUR PLUS is
recommended for baked-on soil.

Changing a cycle or option

During the first minute
of a cycle
1. Press new Cycle and/or Options.
2. Check the detergent dispensers. They
must be filled properly for the new cycle.
SETTING THE CONTROLS
• You can press Cancel/Drain again to stop
the drain immediately. Remember to drain
the dishwasher again before starting a
new cycle.
NOTE: A small amount of water remaining
in the dishwasher is normal.
To clear the indicators:
Press Cancel/Drain before starting the
dishwasher to clear all options and cycle
selections.
High Temp Wash
When High Temp Wash is selected, the dish-
washer heats the water to
140°F (60°C) during the main
HIGH
wash and adds heat and water
TEMP
to parts rinse of the Low
WASH
Energy, Low Energy/China and
Normal cycles. The extra heat improves
washing results. The cycle will be longer
when the High Temp Wash option is select-
ed. The Pots-N-Pans and Heavy cycles auto-
matically use High Temp washes.
Air Dry
When Air Dry is selected, the air in the dish-
washer is not heated during the
"dry" portion of a cycle. Using
Air Dry helps save energy, but
AIR DRY
dishes take longer to dry and
some spotting can occur. Some
items (such as plastics) may need towel dry-
ing. For best drying, use a liquid rinse agent.
NOTE: The dishwasher automatically heats
the air in the dishwasher during the "dry"
portion of the cycle unless you select Air Dry.
After the first minute of a cycle
1. Press Cancel/Drain. A 2-minute drain
cycle starts. Wait for drain to finish.
2. Press a new Cycle.
3. If desired, press one or more Options. To
cancel an option, press the pad again.
4. Check the detergent dispensers. They
must be filled properly for the new cycle.
(on some models)
17