NGM Dynamic Jump L Guide Rapide page 35

CONNECTIVITY: to better use the potentiality provided by the device and its operating
system, you must have an active data connection; data Connection of NGM Dynamic Jump
L is active when you first power ON the phone. If it is not included into your mobile phone
plan, data traffic may cause you extra costs, so it is recommended to configure an Internet
connection via WiFi. To enable data traffic on one of the SIM cards, select Settings > Dual
SIM Manager > Data connection, or activate it from the Quick Setup buttons in the
notifications panel.
Connecting to Internet with WiFi®: you can connect to WLAN by using the Wi-Fi function.
To activate it, choose
the use of wireless devices in areas where the use of such functions is restricted (airplanes,
hospitals, etc.). Go offline mode when you have to use only the functions that do not
require Network access.
Connecting to a Bluetooth® device: turn ON the Bluetooth device you want to connect
with. Refer to the device documentation.
From the main menu, choose
contextual menu you will find additional functions and settings.
Choose Search for devices to automatically find other Bluetooth devices.
Among the discovered devices, select the device name to associate with. The phone will
attempt to associate with the device, which may be asked for a pairing code.
Settings > WiFi. Please follow all warnings and indications concerning
Settings > Bluetooth on/off to turn on Bluetooth. In the
ENGLISH 35