SELFSAT SNIPE DOME Manuel Utilisateur page 21

5
Put back the mounting plate on the silicone
applied and make 2holes (2mm) with power drill.
7
Fix mounting plate on the car roof using 2
M4x20 screws.
9
Apply silicone around the mounting plate.
11
Remove the friction tape and get dry.
20
6
Apply silicone on the holes.
8
Re-apply silicone to cover tightened screws.
10
Tidy the area silicone applied.
12
The image you will see. Place main unit on the
top of fixed plate.