Equipment For Installation - SELFSAT SNIPE DOME Manuel Utilisateur

7-2. Equipment for Installation

2
1
1
Clean the surface with cleaner.
3
Attach friction tape outside of the mounting
plate, to be 4mm away from it.
3
4
7
SNIPE DOME Installation on the car roof
(same for all 4 mounting plate edges)
5
6
2
FRONT
Locate SNIPE DOME in the center of car roof.
4
Put aside the mounting plate to apply silicone
inside the guided tape line.
1 Installation Kit
(Screws M4x20(11)/ M4x16(2), Cable gland ,
Cable gland rubber, Cigar jack adaptor)
Cable holder
2
3 Friction tape
4 2mm drill bit, 15mm drill bit
5 Silicone
Power drill
6
7 Cleaner
19