Settings Menu Options - Bosch HBL8463UC Manuel D'utilisation Et D'entretien

To change the value for the displayed setting, press
4.
the Enter button to enter the edit mode. Use the
numeric keypad to change the setting value. The
corresponding setting value is shown in the table
following.
For the temperature offset, with the item in edit mode,
press "-" or "+" first, then the numeric offset value.
The new value is automatically accepted as the display
reverts from edit mode back to display mode.
To exit the Settings menu:
Press the Oven Clear/Off button.
Oven Temperature Offset
The oven is calibrated to provide accurate results. This
feature is useful if you prefer your foods lighter or darker.
When an offset temperature is selected, the actual oven
temperature is raised or lowered by this value.
Do not use residential oven thermometers to evaluate
oven temperatures as they will fluctuate throughout
cooking.
The oven must be turned off in order to set an offset
value. Refer to Temperature Offset in Settings Menu
Options for setting.
Note: This process can be repeated until a satisfactory
result is achieved. Each time these steps are repeated,
the oven temperature sets to zero. In other words, if the
offset was changed by 5° the first time, the second time
it will need to be offset by 10°. The oven will not add to
the original offset.
18

Settings Menu Options

Menu Item Description
1 Temperature Fahrenheit (°F) or
Mode
Celsius (°C)
2 Brightness High, Medium, Low
3 Volume High, Medium, Low
4 Clock Mode 12-hour or 24-hour display
mode. 12HR, 24HR
5 Auto Decreases oven tempera-
ture by 25°F for Convec-
Convection
tion Bake and Convection
Conversion
Multi-Rack cooking
modes. On, Off
6 Button Beep Tone when button is
pressed. ON, OFF
7 Standby Clock displays when no
cooking mode or timer is
Clock
in use. ON, OFF
Display
8 Language Language setting: English
(EN), French (FR)
9 Temperature Sets the temperature off-
set value for Bake, Con-
Offset
vection Bake, Roast,
Convection Roast and
Convection Multi-Rack.
Temperature offsets must
always be entered as
2 digits. Example: 5°is
entered as 05.
When an offset value is
entered, the actual oven
temperature is increased
or decreased by this
value. This feature is use-
ful if food is either too
brown or too light.
The range for changing
the offset is between +/-
35°F (+/- 19°C) in 1°
increments.
10 Home See Home Connect
Connect chapter.
Default
°F
High
High
12HR
OFF
ON
ON
EN
0