Cooking Time Has Elapsed; Changing Settings; Switching Off The Oven; Kitchen Timer - Bosch HKP541130T Notice D'utilisation

Use the temperature selector to set the temperature.
2.
Turn the selector for the timer function clockwise to the stop
3.
and then back to the required cooking time.

Kitchen timer

When the oven is switched off, the timer function can be used
as a kitchen timer. You can set a cooking time of up to
120 minutes.

Setting the kitchen timer

Turn the timer clockwise to the stop.
1.
Then turn it back to the required cooking time.
2.
The cooking time begins to elapse.

Care and cleaning

With good care and cleaning, your oven will remain clean and
fully-functioning for a long time to come. Here we will explain
how to maintain and clean your oven correctly.
:
Risk of burns!
The appliance becomes very hot. Never touch the interior
surfaces of the cooking compartment or the heating elements.
Always allow the appliance to cool down. Keep children at a
safe distance.
:
Risk of electric shock!
Do not use any high-pressure cleaners or steam cleaners,
which can result in an electric shock.
:
Risk of injury!
Scratched glass in the appliance door may develop into a
crack. Do not use a glass scraper, sharp or abrasive cleaning
aids or detergents.
:
Risk of electric shock!
Penetrating moisture may cause electric shock. Before cleaning
and maintenance, please unplug the mains plug or switch off
the circuit breaker in the fuse box. Do not immerse the
appliance in water or other liquid when cleaning.
20
All manuals and user guides at all-guides.com
The cooking compartment lighting switches on. The oven
begins to heat up. The heating indicator lights up and the
cooking time begins to elapse.
Caution!
Whenever the timer is running, the oven continues to heat up
when the door is open. Keep the oven door closed when the
oven is in operation. After every use, turn the timer to the off
position if it has not yet elapsed.

Cooking time has elapsed

A signal sounds. The oven stops heating. The cooking
compartment lighting goes out. The timer is in the off position.
Turn the temperature and function selectors to position

Changing settings

The type of heating, temperature and cooking time can be
changed at any time with their respective selector.

Switching off the oven

To stop the oven before the cooking time has elapsed, turn the
timer to the off position.
The cooking time can be changed at any time. To do this, turn
the selector clockwise to the stop and then back to the new
cooking time.

Kitchen timer elapsed

A signal sounds, the timer is in the off position.

Switching off the kitchen timer

Turn the timer to the off position.
Notes
Slight differences in the colours on the front of the oven are
■
caused by the use of different materials, such as glass,
plastic and metal.
Shadows on the door panel which look like streaks, are
■
caused by reflections made by the oven light.
Enamel is baked on at very high temperatures. This can
■
cause some slight colour variations. This is normal and does
not affect their function. The edges of thin trays cannot be
completely enamelled. As a result, these edges can be
rough. This will not impair the anti-corrosion protection.

Cleaning agent

To ensure that the different surfaces are not damaged by using
the wrong cleaning agent, observe the information in the table.
Do not use:
Harsh or abrasive cleaning agents,
■
Cleaning agents with a high alcohol content,
■
Hard scouring pads or cleaning sponges,
■
High-pressure cleaners or steam cleaners.
■
Wash new sponge cloths thoroughly before use.
.
Û