Storage And Winterizing - Zodiac t3 Guide Du Propriétaire

3. Thread the outer extension tube onto the cup
assembly and tighten (see Figure 11).
4. Verify the thrust washer is still in place inside
the handnut. Insert the engine into cleaner body,
slide the handnut over the engine extension tube
and tighten (see Figure 12).
5. Make sure the extension tube
swivels freely by spinning it (see Figure 13).

Storage and Winterizing

Never coil the hose. Store the T3 cleaner out of direct sunlight. When storing for the winter, drain all water from
the cleaner. Remove all connectors and adapters from the dedicated suction line or skimmer. Store the disc flat,
and hose sections disconnected, drained and straight.
|
Owner's Manual Zodiac T3 Pool Cleaner
® ®
ENGLISH Page 11
Figure 11
Figure 12
Figure 13