Seagate Scorpion 240 DDS-4 Autoloader Manuel D'installation page 48

A-46
3. Use the config command to rebuild the kernel and include
Solaris 2.x
1. To configure Solaris 2.x for compatibility with the Scorpion
tape-config-list=
"SEAGATE DAT
SEAGATE_DAT = 1,0x34,0,0xd639,4,0x00,0x8C,0x8C,0x8C,3;
Note: The inquiry string above contains four spaces between
2. After modifying the file st.conf , you must reconfigure the
Scorpion 240 Autoloader Installation Manual
the new device definition. Refer to the config man page
for details.
240, add the following lines to the file st.conf in the
directory /kernel/drv .
06240-XXX","Seagate DAT Drive","SEAGATE_DAT";
the word DAT and the value 06240.
kernel by booting the system using the boot -r command