About The Front-Panel Buttons A - Seagate Scorpion 240 DDS-4 Autoloader Manuel D'installation

A-26
Automatic and manual cartridge loading
After cartridges have been loaded into the magazine and the
magazine has been inserted into the magazine bay, the
autoloader can be left indefinitely for unattended write or read
operations (controlled by your backup software).
To load a tape manually, press the SELECT button to select
the desired tape slot, then press the ENTER button.
About the front-panel buttons
This section describes the functions of the autoloader buttons.
These buttons are shown in Figure 11 below.
Figure 11. Autoloader Front Panel
Eject button
You can use the Eject button to eject the magazine or to
unload a cartridge from the drive. After pressing the Eject
button, you must press the Enter button to confirm your
request.
Select button
You can use the Select button to select individual tape
cartridges by their slot numbers (1 through 6), to scroll
Scorpion 240 Autoloader Installation Manual
Clean
Media
LED
LED
(green)
(green)
LCD
Drive
Display
LED
(amber)
EJECT
Button
SELECT
Button
ENTER
Button