Rear Shock Absorber - Yamaha WR250F Manuel D'atelier Du Proprietaire

EC580000

REAR SHOCK ABSORBER

Extent of removal:
Extent of removal
Preparation for removal
1 Rear shock absorber removal
Order Part name
REAR SHOCK ABSORBER REMOVAL
Hold the machine by placing the suitable
stand under the engine.
Seat and side covers
Silencer
Drain the coolant.
Catch tank breather hose
Catch tank hose
Air induction hose (air cut-off valve-air filter
case)
Cylinder head breather hose
Battery
Disconnect the starter relay coupler.
Starter motor lead
REAR SHOCK ABSORBER
2 Rear shock absorber disassembly
Q'ty
Support the machine securely so there is no
danger of it falling over.
Refer to "SEAT, FUEL TANK AND SIDE COVERS"
section in the CHAPTER 3.
Refer to "EXHAUST PIPE AND SILENCER" section
in the CHAPTER 3.
Refer to "COOLANT REPLACEMENT" section in the
CHAPTER 3.
Disconnect at the catch tank side.
Disconnect at the catch tank side.
Disconnect at the air filter case side.
Disconnect at the air filter case side.
Refer to "BATTERY INSPECTION AND
CHARGING" section in the CHAPTER 3.
Disconnect at the starter relay side.
6 - 141
CHAS
Remarks
WARNING