How To Disassemble Easy Ice Maker - LG GR-D31FTKHL Manuel Du Propriétaire

30 HOW TO USE
CAUTiON
• It is normal for the water reservoir
bottle to have some ice in it. remove
any ice from it when refilling it.
• Ensure that there is enough space
in the ice bank before twisting ready
made ice out from the ice tray.
Ejecting Ready Made Ice.
• Turn the rotary knob firmly until all the ice
has ejected from the ice tray into the ice
bin. Repeat the twisting action if necessary
until all ice is removed.
• If unfrozen ice is ejected into the ice bin, it
will cause the existing ice cubes in the ice
bin to lump together.
(It takes about 4 hours for ice production at
-20°C)
CAUTiON
• If the freezer door (door of the ice
maker) is frequently opened, warm air
enters the freezer, and the time for
water to freeze may be longer.
• Ice may not be made until 24 hours
after the initial installation of the
fridge.
• Be careful of pointed corners of some
dispensed ice cubes.
• Lift the ice bin gently when removing it if it
has ice in it.
• Ensure the ice tray is fully inserted when
refitting.
• The ice storage bin has a maximum storage
capacity of 3 ice tray harvests. Over filling
the ice bin will cause it to jam when
removing it.

How to Disassemble Easy Ice Maker

1
Hold both ends
of door basket on
upper part of easy
ice maker to remove
it upward.
2
Hold both ends
of defrosting
compartment on
upper part of easy
ice maker to remove
it upward.
CAUTiON
• Disassembly must be in the above
order to avoid damage to the ice
maker parts
• When the ice making section is
storage bin, hold it level and pull it out
so that the ice storage bin does not
fall out.
1
1
2
2