Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
Care and Maintenance
Freezer
Compartment
Lamp
Freezer
Compartment
Shelf
Door Rack and
Support
Ice Storage Bin
After Dispenser
Is Used
All manuals and user guides at all-guides.com
How to Dismantle Parts
NOTE
•
Dismantling is done in the reverse sequence of assembly.
Be sure to unplug the power plug before dismantling and assembly.
Never apply severe force to dismantle parts. Parts may be damaged.
Remove cover by pressing upward on bottom
and rotating outward
Turn the bulb counterclockwise max. 40 W bulb
for refrigerator is used and can be purchased at
a service center.
To remove a shelf, lift the left part of the
shelf a bit. Lift it to the direction , push the
right part to the direction , and take it out.
Lift the door rack holding both sides
pull it out to
direction.
Hold the ice storage bin as shown in the right
gure and pull it out
while slightly lifting it .
Do not dismantle the ice storage bin unless
it is necessary.
Use both hands to remove the ice bin to avoid
dropping it.
The water collector has no self-draining
function. It should be cleaned regularly.
Remove the cover by pulling the front
side of
water collector cover and dry it
with a cloth.
20
6
.
and
2
1
Publicité
Chapitres
Table des Matières
Dépannage
