Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
(5) In Use/Memory Lamp
Flashes or lights during operation. Lights also when there are documents stored in the machine's
memory.
(6) [COPY]
Switches the machine to copy mode.
(7)
[FAX]
FAX
Switches the machine to fax mode.
(8) [SCAN]
Switches the machine to scan mode. In scan mode, the machine scans a document to your computer
according to the settings selected. This button is used when the machine is connected to a computer.
(9) [PHOTO]
Switches the machine to photo print mode.
(10) Alarm Lamp
Flashes when the machine is turned ON or OFF, when an error occurs, or when paper or ink has run
out.
(11) [Enlarge/Reduce]
Sets the enlargement or reduction ratio for copying.
(12) [Collate]
Selects software collation (sorting).
(13) [Paper]
Selects the paper size and paper type for copying, and
(14) [ON/OFF]
Turns the machine ON and OFF. Before turning ON the machine, make sure the Scanning Unit is
closed.
(15) Numeric Keys
Enter numerical values such as the number of copies, as well as
characters.
(16)
[Tone]
FAX
Switches temporarily to tone dialing. Also changes the mode when entering characters.
Chapter 1
for received faxes.
FAX
fax/telephone numbers and
FAX
Introduction
19
Publicité
Table des Matières
