Getting Started; Important Information About Your Rice Cooker - Black & Decker RCD514 Guide D'utilisation Et D'entretien

GETTIN G START ED
This appliance is intended for household use only.
• Remove all packing material, any stickers, and the plastic band around the
power plug.
• Go to www.prodprotect.com/applica to register your product.
• Wash all removable parts as instructed in CARE AND CLEANING.
Place the clean, dry cooking pot in the cooking base.
• Select a location where this unit is to be used. Place the unit on a stable, heat
resistant surface, free from cloth, liquids and any other flammable materials.
Ensure that the unit has enough space all the way around and above it to
allow heat to flow without damage to cabinets or walls.
IM PORTA NT IN FOR MATION ABOUT YOUR
RICE CO OKE R
• It is not necessary to preheat the rice cooker before use.
• The cooking bowl gets hot. When in use, always use oven mitts or
potholders when touching any outer or inner surface of the appliance.
• During the first few minutes of use you may notice smoke and a slight
odor. This is caused by oil that may have been used during manufacturing
of the unit and will not impact the performance.
• As rice cooks, steam will escape through vent in lid. Place glass lid on the
rice cooker so the steam vent is facing away from cabinets and walls. Do not
place hand over steam vent while rice is cooking; the hot steam may burn.
• Use the plastic serving spoon (or a wooden spoon) to stir and remove
rice. Do not use metal utensils that can scratch the nonstick cooking bowl.
• Do not fill the cooking bowl higher than highest water marking measurement.
• When the rice cooker is plugged in, two dashes will blink on the display
screen, indicating that the rice cooker is on standby and ready to
program. A solid light indicates that the rice cooker is cooking.
7