Display Illumination - Bosch GLM400CL Consignes D'utilisation/De Sécurité

Select the "Measurement unit" in the tool settings.
Unit of measure "in" (inches) is set by default.
Set the required unit of measure and confirm by pressing
button 13 [Func].
To exit the menu item, press the On/Off/Clear button 9 [ ] or
soft key 3 [
switch off the measuring tool.
Select the "Angle unit" in the tool settings.
Angle unit "°" (grade) is set by default.
Set the required angle unit and confirm by pressing button
13 [Func].
To exit the menu item, press the On/Off/Clear button 9 [ ] or
soft key 3 [
switch off the measuring tool.
Confirm the setting by pressing button 13 [Func].
An initial activation is required. Data transmission is only
possible with the corresponding app or the corresponding PC
program.
Select the display illumination in the basic settings (general
settings).
The display illumination is continuously switched on. When
no button is pressed, the display illumination is dimmed after
approx. 30 seconds to preserve the batteries.
The time until start of dimming is adjustable (tool settings).
The brightness of the display can be adjusted to the
surrounding conditions in multiple increments (general
settings).
28
2610050173 04-18 GLM400CL.indd 28
Changing the Unit of Measure
]. The selected setting remains saved after you
Changing the Angle Unit
]. The selected setting remains saved after you
BlueHound

Display Illumination

4/19/18 11:12 AM