Before Calling The Service - AEG S74010CMX2 Guide D'utilisation

PART- 6.

BEFORE CALLING THE SERVICE

Check Warnings;
Your fridge warns you if the temperatures for cooler and freezer are in improper levels or
when a problem occurs in the appliance. Warning codes are displayed in the Freezer and
Cooler Indicators.
ERROR TYPE ERROR TYPE
SR
Freezer comp.
LF
Not Cold enough
Refrigerator
LC
Not Cold enough
not cold enough
LF and LC
Refrigerator
HC
comp. too Cold
Low voltage
LOPO
There is/are some part(s)
Failure
Out of order or there is a
Warning
failure in cooling process
This caution w ill be seen
especially after long term of
pow er f ailure
Ideal temperature f or Ref .
Compartment is +4
comp.
see this w arning your f oods
have risk of spoiling.
It is the combination of LF
Warning and LC Error type
The f oods starts to freeze
because of the too much
cold temperature
When the pow er supply gets
low er than 170 V the
Warning appliance gets to steady
position.
WHY
Call Service f or assistance as
soon as possible.
1. Do not f reeze the f oods that are
thaw and use in short time period.
2. Set the freezer temperature to
colder values or set the super
freeze , until the compartment gets
to normal temperature.
3. Do not put fresh f ood until this
failure is off .
1. Set the ref rigerator temperature
to colder values or set the super
o
C. If you cooling mode until the compartment
gets to normal temperature.
2. Do not open the door much until
this f ailure is of f
You w ill see this f ailure w hen f irst
starting the appliance. It w ill be of f
after the compartments gets
normal temperature
1. Check if the "Super cooling
mode" is on
2. Decrease the ref rigerator
temperature values
This not a failure. This prevents
any damages on the compressor.
This w arning w ill of f af ter the
voltage gets required level
EN - 29 -
WHAT TO DO