Balboa 908 M3301 Mode D'emploi page 25

C● Air pump:
Normal starting up time is 15-30 minutes
Please notice that water level should not be 7cm over the tub water level to prevent air pump being burnout
by water leakage.
D● Paper element filters daily maintenance:
Type one:
10. REMOVE THE OUTER COVER OF THE SKIMMER
11.
PULL OUT THE FILTRATION TUCK NET
12.
CIRCUMVOLVE AND TAKE OUT THE PAPER CORE
13.
WASH THE PAPER CORE WITH WATER, RESET IT AFTER CLEANING
Type two:
6. TEAR OFF THE PACKAGE OF THE PAPER CORE AND PUT IT INSIDE THE FILTRATION BUCKET
7. PULL OUT THE FILTRATION TUCK NET
8. MATCH THE PAPER CORE CORRECTLY INSIDE AND SCREW DOWN IT IN SEQUENCE, THEN PUT THE
COVER OF FILTRATION BUCKET ON TOP.
Type three:
1.use the key to open the service door
and turn off the valve of the water
pump
4. Take away the cover of the filter.
Noted: Different spa model with standard configuration will be equipped with one of these three filtrations,
please install and clean the paper core in accord with the proper filtration system you purchase.
2. turn on the
decompressing valve, and
turn on the drainage valve of
the filter
5. Take out the paper core.
3. Let the water in the filter drain
out
.
6. Clean the paper core with
water, and put it inside.
- 24 -