Installation Of Chromotherapy Spa Spotlight - fluidra DIGITAL SWIMSPA Manuel De Fonctionnement

Digital Compact Equipment Manual for Swimspa

2.3.4 Installation of chromotherapy spa spotlight

Optional spotlight with high-intensity chromotherapy
Before connecting the kit to the mains, first connect the spotlight of the spa to the control panel of the
chromotherapy spotlight. If the cable supplied with the spotlight is too short to cover the distance of
the installation, lengthen it with a 4-wire cable. To avoid voltage loss in the electric cables, use
cables with suitable sections according to the length.
The spotlight cable cannot be changed under any circumstances. The cable supplied
guarantees an IPX8 waterproofing. If a different cable is used, it could cause a loss in
watertightness leading to serious damage of the spotlight.
Open the control cabinet, pass the cable through the free packing gland. Connect the cable to the
connection strip as shown in the picture. Each of the four wires should be connected in its
corresponding terminal as follows:
R – Brown
B – Blue
G – Black
COM – Green / Yellow
If the connections are not as indicated, it could cause the connected spotlight to
malfunction and could lead to serious damage.
Finally, the button of the spa should be connected to the pneumatic switch of the control cabinet
using the tube provided with the Kit.
Length (m) Cable section
0-20 1.5 mm2 Cu
20-30 2.5 mm2 Cu
30-50 4 mm2 Cu
10
EN