Klein Tools CL310 Mode D'emploi page 14

enGliSH
capacitance
1. Insert RED test lead into VΩ jack
COM jack
Continuity/Resistance/Capacitance/Diode-Test
note: The meter defaults to Continuity testing in this mode. Press
the "SELECT" button
The Capacitance icon
should read 0 nF with test leads open.
2. Remove power from circuit.
3. Measure capacitance by connecting test leads across the
capacitor. The meter will auto-range to display the measurement
in the most appropriate range.
Black lead
14
operatinG inStructionS
, and rotate function selector switch
4
twce to enter Capacitance testing mode.
12
will appear on the display. The meter
Red lead
, and BLACK test lead into
5
to the
2
setting.