Tectro TBH 570-3 Manuel D'utilisation page 150

10.
11.
12.
13.
14.
15.
4
150
man_TBH570-3-TBH572-3 ('21) V1.indd 150 man_TBH570-3-TBH572-3 ('21) V1.indd 150
PROGRAMME 1 (ON1 AND OFF1)
1. The desired switch-on and switch-off timer must be set when the
remote control is switched off.
2. The stove retains the temperature and heat output settings it had
before being switched off.
3. The minimum period of time between switching off and switching on
is 20 minutes. This is the time needed for the stove to complete the
cooling-down phase.
4. After a brief power interruption, the timer mode will have to be set
again.
ECONO SEND
ACTIVATE AUTOMATIC MODE (ON1)
TURBO
Press button ON 1 (1) to switch on the stove according to programme 1. The time AUTO
OFF 1
ON 2 CANCEL OFF 2
and ON1 symbol will flash on the remote control. Use the buttons
(2&3) to select the desired time (10-minute intervals). To confirm, choose
The desired activation time is shown in the remote control. Press
The display (5) on the stove will show Chrono. See figures 10 and 11.
ECONO SEND
DEACTIVATE AUTOMATIC MODE (OFF1)
TURBO
AUTO
Press button ON 1 OFF 1 (1) to switch off the stove according to programme 1. The time
CANCEL
ON 2 OFF 2
and OFF1 symbol will flash on the remote control. Use the buttons
(2&3) to select the desired time (10-minute intervals). To confirm, choose
The desired deactivation time is shown in the remote control. Press
firm. The display on the stove will show Chrono. This text will disappear when the
set switch-on time and switch-off time have elapsed. See figure 12.
ECONO
TURBO
PROGRAMME 2 (ON2 AND OFF2)
ON 1
As above but use buttons
ON 2
CANCELLING SET TIMER PROGRAMMES
Press the corresponding ON or OFF button of the programme you wish to cancel.
The hours and minutes and the corresponding symbol appears in the remote con-
trol display. Press the CANCEL (2) button to cancel the stove's automatic switch-on
and switch-off schedule. Press SEND (3) to confirm. See figure 13.
DAILY REPETITION
The AUTO mode allows the set switch-on and switch-off timer to be repeated every
day. To activate this mode, hold down the
(2) will appear on the remote control display. Press
on the stove will show Chrono. To deactivate this mode, hold down the
(1) for at least 2 seconds then press
Always clean the brazier before the stove starts up automatically. This
will prevent damage to the stove and the area around it.
ECONO SEND SEND
TURBO
AUTO AUTO
ON 1 OFF 1 OFF 1
(1) and (2).
ON 2 CANCEL CANCEL OFF 2 OFF 2
ECONO SEND
TURBO
button (1) for at least 2 seconds.
ON 1 AUTO OFF 1
ON 2 CANCEL OFF 2
(3) to confirm. The display
ECONO SEND
TURBO
ON 1 AUTO
OFF 1
(3). See figure 14.
ECONO SEND
ON 2 CANCEL OFF 2
TURBO
AUTO
ON 1 OFF 1
ON 2 CANCEL OFF 2
ECONO SEND
ECONO SEND
and
TURBO
ECONO SEND
TURBO
AUTO
ON 1 ON 1 (1). OFF 1 AUTO OFF 1
TURBO
ON 2 CANCEL OFF 2
ON 2 CANCEL OFF 2
ON 1 AUTO (4) to confirm.
OFF 1
ECONO SEND
ON 2 TURBO CANCEL
OFF 2
AUTO
ON 1 OFF 1
ON 2 CANCEL OFF 2
ECONO SEND
ECONO SEND
and
TURBO
ECONO SEND
TURBO
ON 1 ON 1 AUTO AUTO (1).
OFF 1 OFF 1
TURBO
ON 2 CANCEL OFF 2
ON 2 CANCEL OFF 2
AUTO (4) to con-
ON 1 OFF 1
ECONO SEND
ON 2 CANCEL TURBO OFF 2
ON 1 AUTO
OFF 1
ON 2 CANCEL OFF 2
ECONO SEND
TURBO
ON 1 AUTO OFF 1
ECONO SEND
ON 2 CANCEL OFF 2
TURBO
button
AUTO
ON 1 OFF 1
ON 2 CANCEL OFF 2
13-07-2021 13:38 13-07-2021 13:38