Using Picture In Picture Function; (Secondary Audio/Video Playback); Using The Feature Of Bd-Live - Yamaha BD-S477 Mode D'emploi

Masquer les pouces Voir aussi pour BD-S477:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

■ Using Picture in Picture function

(secondary audio/video playback)

BD-Video that includes secondary audio and video
compatible with Picture in Picture can be played back
with secondary audio and video simultaneously as a small
video in the corner.
Primary video
While PIP Mark (
Audio Mark (
) is displayed, press
PIP to turn the Picture in Picture
function on/off.
Notes
– To listen to secondary audio, make sure that the
Audio Output setting (HDMI) is set to PCM or
Reencode (p. 31).
– Depending on the disc, to listen to secondary audio,
you may need to set secondary audio to on from the
top menu of the disc (p. 7).
– The secondary audio and video for Picture in Picture
may automatically play back and be removed
depending on the content. Also, playable areas may
be restricted.

■ Using the feature of BD-Live™

1. Set the Network setting (p. 28).
2. Connect the USB memory device
to this Player (p. 14).
BD-Live data is saved in a USB memory device
connected to this Player. To enjoy these functions,
connect a USB memory device supporting USB 2.0
High Speed (480 Mbit/s) to one of the USB
connectors (front/rear) of this Player to use the USB
memory device as Local Storage.
– Local Storage is used as an auxiliary memory when
Blu-ray Disc is played back.
– Use a USB memory device with at least 2GB of free
space.
– BUDA folder is created automatically in the USB
memory device when necessary.
– If there is insufficient storage space, the data will not
be copied/downloaded. Delete unneeded data or use
a new USB memory device.
– Some time may be required for the data to load
(read/write).
Secondary video
) or Secondary
Notes
– Yamaha cannot guarantee that all brands' USB
memory devices will operate with this Player.
– Do not use a USB extension cable when connecting
a USB memory device to the USB connector of the
Player. Using a USB extension cable may prevent
the Player from performing correctly.
3. Play back the disc.
4. Run BD-Live according to the
instructions on the disc.
Notes
– Do not remove the USB memory device or disconnect
unplug the power cable during BD-Live operations.
– Regarding playback method of BD-Live contents,
etc., perform the operations in accordance with the
instructions in the Blu-ray Disc manual.
– To enjoy BD-Live functions, perform the network
connection (p. 12) and Network settings (p. 28).
– Refer to "BD-Live Connection" (p. 29) regarding the
setup to restrict access to BD-Live contents.
– The time required to download the provided programs
into the USB memory device connected to this Player
varies depending on the internet connection speeds
and the data volume of the programs.
– BD-Live programs provided through the internet
may not be able to display the connection depending
on the status (upgrading) of the provider. In such
cases, take out the disc and try again.
– If the BD-Live screen does not appear for a while
after you select the BD-Live function in the Blu-ray
Disc menu, the USB memory device may not have
enough free space. In such cases, eject the disc from
the Player, and then erase the data in the USB
memory device using the "Format" menu in the
"Local Storage" (p. 27).
Advanced playback operation
23
En
3

Publicité

Chapitres

Table des Matières
loading

Table des Matières