Appendix Bfuse Replacement - Toro CUSTOM COMMAND Guide D'utilisation

Appendix B
FUSE REPLACEMENT
If fuse replacement is required, replace only with the same type
and rating. Installing a higher amperage fuse can result in serious
injury and or equipment damage due to fire hazard. Ensure power
to controller is off prior to removing or installing fuse.
1. Disconnect power to the controller.
2. Locate fuse (see page 3, item 17) and carefully remove it from the
retaining clips.
3. Locate the replacement fuse supplied in the mounting hardware
accessory bag. Install the new 2.0A slow-blow fuse, ensuring it is
securely seated in the retaining clips.
4. Restore power to the controller.
Fuse Replacement
WARNING
27