Mode Selection; Sound Control Mode; Auto Mode; Slave Mode - Cameo TRI CLMOVER1 Manuel D'utilisation

MODE SELECTION:

SOUND CONTROL MODE

Press the mode button to select sound mode. The unit will then run via sound
thanks to the built in microphone. Press SETUP to access edit mode (the
last 2 figures will blink), then press the UP or DOWN buttons to adjust the
sound sensitivity level. Press SETUP to confirm. Setting „SU00" stands for
microphone switched off.
The sound sensitivity is adjustable from 01 up to 99 (value 99 stands for
maximum sensitivity).
RGB
01 - 99 sound sensitivity adjustable.

AUTO MODE

Press the MODE button to enter AUTO mode. The unit will run slowly with
color changing effects.

SLAVE MODE

Press the MODE button to enter SLAVE MODE.
Link the slave unit and the master unit via DMX cable. The slave unit will
follow in sequence with the master unit.
DMX ADDRESS SETTING MODE
Press the MODE button to enter DMX ADDRESS SETTING MODE.
Press SETUP to access edit mode (the last 3 figures will blink). Use the UP
and DOWN buttons to set the DMX address (A001 - A512).
Press SETUP to confirm.
8
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP
SETUP