Changing The Lamp - Veripart VPKVC176Z Mode D'emploi

Follow the steps below to remove frost build-up:
1. Remove any frozen food, shut off the mains power supply, open the
refrigerator door, and gently scrape any frost from the inner wall using
an ice scraper. To speed up the thawing process, you can place a
bowl of hot water inside the fridge freezer combination, and once the
iced-over frost becomes loose, use an ice scraper to scrape it off and
remove it.
2. After defrosting, clean the inside of the fridge freezer combination and
switch on the power supply.

Changing the lamp

The LED lamp used to light the inside of the fridge freezer combination offers
low energy consumption and a long service life. In case of any abnormality,
please contact the after-sales personnel for a service call-out. The lamps, like
all parts of the appliance, can only be replaced by the manufacturer.
Safety-check after maintenance
Is the power cord broken or damaged?
Is the power plug firmly inserted into the socket?
Is the power plug abnormally overheat?
Note!
• Electric shocks and fires may result if the power cord or plug is
damaged or covered with dust. If there is any abnormality, please
unplug the appliance and contact the vendor.
50