Unpacking; Inserting Batteries Into The Remote; Hookup Overview; Before You Get Started - Sony STR-DE345 Mode D'emploi

Masquer les pouces Voir aussi pour STR-DE345:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Getting Started
Getting Started

Unpacking

Check that you received the following items with the
receiver:
• FM wire antenna (1)
• AM loop antenna (1)
• Remote commander (remote) (1)
Model
STR-DE345
STR-DE245
• Size AA (R6) batteries (2)
• Operating instructions of the remote RM-PP404
(STR-DE345 only)

Inserting batteries into the remote

Insert two size AA (R6) batteries in accordance with
the + and – markings on the battery compartment.
When using the remote, point it at the remote sensor g
on the receiver.
When to replace batteries
Under normal use, the batteries should last for about 6
months. When the remote no longer operates the
receiver, replace both batteries with new ones.
Notes
• Do not leave the remote in an extremely hot or humid
place.
• Do not use a new battery with an old one.
• Do not expose the remote sensor to direct sunlight or
lighting apparatuses. Doing so may cause a malfunction.
• If you don't use the remote for an extended period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
4
US
Remote
RM-PP404
RM-U304
]
}
}
]

Hookup Overview

The receiver allows you to connect and control the
following audio/video components. Follow the
hookup procedures for the components that you want
to connect to the receiver on the pages specified. To
learn the locations and names of each jack, see "Rear
Panel Descriptions" on page 24.
Video Component
Hookups (6)
TV monitor
(STR-DE345
only)
Speaker
System
TV tuner
Hookups (7)
SAT (Satellite
Front
receiver)
speaker
(L)
VCR
CD player
speaker
Rear
speaker
MD/Tape deck
(L)
Audio Component
Hookups (5)

Before you get started

• Turn off the power to all components before making
any connections.
• Do not connect the AC power cords until all of the
connections are completed.
• Be sure to make connections firmly to avoid hum
and noise.
• When connecting an audio/video cable, be sure to
match the color-coded pins to the appropriate jacks
on the components: Yellow (video) to Yellow; White
(left, audio) to White; and Red (right, audio) to Red.
DVD player/Dolby
Digital decoder
Antenna Hookups (5)
AM/FM antenna
Front
speaker
(R)
Center
Active
Rear
woofer
speaker
(R)

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

Str-de245

Table des Matières