Unit Description; General Description - VWR VAPOUR-Line eco 25 Manuel D'instructions

Unit description

General description

The VAPOUR-Line eco 25 autoclave operates by heating element and is classified as a "self-contained steam
generator".
Operating/project conditions
Working pressure 2,1 bar
Design pressure 2,2 bar
Hydraulic test pressure 3,3 bar
Hydraulic test temperature 20 °C
Overall dimensions
Height: 940 mm - height with open lid: 1280 mm
Width: 480 mm - width with taps 550 mm
Depth: 510 mm - depth with cable 540 mm
Weight: 45 kg
Sterilisation vessel
Total nominal volume 25 l
Water required 3 l
Sterilisation vessel description
Vertical cylindrical chamber, manufactured in AISI 316L S/S electro polished.
AISI 316L lid, covered with insulating ABS to prevent burns, equipped with a handle for a friendly open/close
operation.
Silicon cover gasket specially fitted for high temperatures.
Structure description
AISI 316L S/S square-shaped outer body.
Safety devices
The autoclave is equipped with the following safety devices:
1. Thermostatic over-heating cut-off
2. Microprocessor electronic safety; prevents total chamber overheating when temperature reaches 138 °C
3. Lid sensor
4. Pressure activated mechanical lock
5. Shut-off safety valve when pressure gets over 2,2 bar
5