Custom Settings - Monogram ZHU36 Manuel Du Propriétaire

1. Press and hold All Off pad for 3 seconds,
Custom
Settings
2. "C - -" appears on display. To navigate
3. To activate a new Custom Setting the user
4. The cooktop will exit Custom Settings if it is
5. To exit Custom Settings and save any
Custom Settings Chart
Custom Settings Custom Setting Choices
C0 (Factory Settings)
C1 (Control Lock)
C2 (LED light level)
C3 (Button Loudness)
C4 (Timer Alarm
Loudness)
C5 (Timer Alarm
Duration)
C6 (Timer Mode)
* Options in grey are default settings
12
then immediately press and hold the Timer
Select pad for 3 seconds to enter custom
settings. Those two pads must be pressed
within 30 seconds. Any other pad will cancel
mode.
through the Custom Settings, use the
or V (down) pads. If (up) is selected the
display cycle starts at "C01". If V (down) is
selected, the display cycle starts at "C62".
will touch and hold the Timer Select pad
for 3 sec. Only ONE of the Custom Setting
Choices can be activated for each Custom
Setting. The red "On" LED will turn on and a
sound will go off once a new custom setting
is activated.
inactive for 3 minutes.
changes, touch and hold the All Off pad for
3 seconds.
C01 - Factory Reset (Clears customized settings and restores defaults)
C02 - Custom settings activated (Not visible unless any other custom setting is selected. And
automatically on when any other custom setting is selected. Not selectable by user.)
C11 - Standard Lock (ie; Only on when lock button pressed for 3 seconds.) If using a timer,
Control Lock is unavailable.
C12 - Auto Lock (ie; Engages after cooktop has been in standby mode for 10 minutes.) The
unit should be completely off to go into Auto Lock.
C21 - Full illumination
C22 - Medium illumination
C23 - Lowest illumination
C31 - All sounds activated at 100% (For alarm sounds, 100% = Whatever level is set in c4.)
C32 - Button sound level reduced by 50%, Alarm sounds at 100%
C33 - Button sounds deactivated, Alarm sounds activated at 100%
C41 - High
C42 - Low
C51 - Indefinite (ie; alarm continues until cancelled by user).
C52 - Alarm sounds for 60 seconds.
C53 - Alarm sounds for 30 seconds.
C54 - Alarm sounds for 15 seconds.
C61 - Single Kitchen Time (Independent of elements.)
C62 - Multi-Timer (Tied to each element.)
Using Your Cooktop
Induction Cooktop
(up)
49-80826-1