The Recording Menus - Targa CR 1.0 A1 Manuel D'utilisation Et Informations Sur Les Services

CR 1.0 A1
Beep Sound
Language
Frequency
Image rotation
Format
Default Setting
Version

The recording menus

Video recording menu
The video recording menu allows you to set the different video recording parameters. How to open
the video recording menu:
1. Power the device on by pressing and holding the On/Off button (14) for approx. 3 seconds.
2. By default, the "Loop recording" option appears. Press the OK button (12) to select it or, if the
Dashboard Camera is connected to the car charger, wait a few seconds for the "Loop
recording" mode to be enabled automatically.
3. Press the OK button (12) to stop video recording.
4. Press the Menu button (11) to display the Video Recording menu.
32 - English
You can choose between the power-off times of 1 minute, 3 minutes or
disable the automatic power-off function.
Here you can set whether or not the device makes a sound every time
you press a button. This option also enables or disables the power-on
sound at the same time.
Select the desired display menu language (see also "Setting the menu
language" on page 18).
Select the mains frequency to avoid any interference from fluorescent
lighting. A mains frequency of 50 Hz is used across Europe; in
America the mains uses a frequency of 60 Hz.
This function allows you to rotate the image by 180°.
This function lets you delete all contents from your memory card
(optional accessory) and renew the file saving structure on your card
(formatting).
Warning! All saved videos and pictures will be erased and cannot be
restored. This also applies to protected files. Make sure that all
recordings you want to keep have been backed up to a different
storage medium.
All device parameters will be reset to their factory-default values.
This does not erase any data from your memory card.
This function displays your Dashboard Camera's current firmware
version. You might need this information when contacting customer
services for example.