Getting Started; Turning On The Dashboard Camera; Turning Off The Dashboard Camera; Setting The Menu Language - Targa CR 1.0 A1 Manuel D'utilisation Et Informations Sur Les Services

CR 1.0 A1
Camera turned on. Therefore, to avoid discharging the battery to a level where the
engine cannot be started anymore, we recommend you to disconnect the car charger
from the cigarette lighter of your car when leaving the car.

Getting started

Please charge the battery before first use of the device.

Turning on the Dashboard Camera


Press and hold the On/Off button (14) for at least 3 seconds to turn on the Dashboard
Camera.

Or, if you have connected the Dashboard Camera to your car's cigarette lighter using the car
charger and this can be turned on and off with the ignition key, switch the ignition on to turn
on the Dashboard Camera. In this case, loop recording will start automatically.

Turning off the Dashboard Camera


Press and hold the On/Off button (14) for at least three seconds to turn off the Dashboard
Camera.

Or, if you have connected the Dashboard Camera to your car's cigarette lighter using the car
charger and this can be turned on and off with the ignition key, switch the ignition off to turn
off the Dashboard Camera. The message "Shutting down..." will flash for approx. 30 seconds
and the Dashboard Camera will turn off automatically.

Setting the menu language

The procedure described below only works when the Dashboard Camera is NOT
connected to the computer with the USB cable. If necessary, first disconnect the USB
cable from the USB/charge port (5) on the Dashboard Camera.
1. Power the device on by pressing and holding the On/Off button (14) for approx. 3 seconds.
2. Press the – (17) or + (18) button several times until the "Setup" Menu is displayed.
3. Press the OK button (12) to open the "Setup" menu.
4. Press the – (17) or + (18) button several times until the "Language" option is selected.
5. Press the OK button (12) to open the "Language" option.
18 - English