Video Light; Exposure Compensation - Targa CR 1.0 A1 Manuel D'utilisation Et Informations Sur Les Services

CR 1.0 A1
I
J x4.0
K 10:32:00
L 12/12/2014

Video light

In dark environments you can enable the 4 built-in white LEDs (8).
1. During the video recording, press the OK button (12) to stop recording and then the Menu
button (11) to bring up the menu for the current mode.
2. Using the – (17) and + (18) buttons, select the "LED Light" option and confirm by pressing the
OK button (12).
3. Using the – (17) and + (18) buttons, select the "On" option and confirm by pressing the OK
button (12) to turn on the video light.
Alternatively, press the "Off" option and confirm by pressing the OK button (12) to switch off
the video light.
Once you have enabled the function, the video light will come on automatically when there is
insufficient light. It will remain off in bright conditions to save the battery.

Exposure compensation

You can define an exposure compensation value for video recordings.
1. With video recording or photo capture paused, press the EV button (10) to bring up the
exposure compensation menu.
2. Using the + (18) and – (17) buttons, select the desired option and confirm by pressing the OK
button (12). While making your selection the preview image on the display (13) will change in
real time so that you can quickly see which exposure value is currently most suitable.
You may choose an exposure value between – 2 and + 2 in 1/3 exposure value increments.
If the picture is too bright, select a negative value for exposure compensation.
If the picture is too dark, select a positive value for exposure compensation.
22 - English
Battery level
: battery fully charged
: battery 2/3 full
: battery 1/3 full
: battery almost empty
Zoom indicator
Current time
Current date