General Safety Guidelines - LiftMaster LM3800W Mode D'emploi

START BY READING THESE IMPORTANT SAFETY INSTRUCTIONS!
1

General Safety Guidelines

Before you begin the installation:
Please read the operating instructions and especially the precautions. Keep the manual for future reference and pass it on to a possible subsequent
owner. The following symbols are placed in front of instructions to avoid personal injury or property damage. Read these instructions carefully.
CAUTION
Personal injury or property damage
Important safety information
The automated door opening system has been as a matter of course tested and designed for safe operation, but safety can be assured only if the
safety instructions listed below are strictly adhered to during installation and operation. This product is intended for installation only by trained garage
door technicians. This product may require adjustments to door springs and/or track configurations. This product is not intended for use on low
headroom tracks with outside pickup drum or garage doors utilizing extension springs.
• The installer (specialist) must carefully read and understand these instructions before starting any work. Before first use and at least annually
a specialist must inspect powered windows, doors and gates regarding their safe condition. Specialist is, who on the basis of their technical
training and experience, has sufficient knowledge in the field of powered windows, doors and gates and moreover is familiar with relevant state
occupational safety regulations and generally accepted rules of technology in such an extent that he is also able to assess the safe working
condition of powered windows, doors and gates.
• The person installing must have knowledge of the following standards: EN 13241, EN 12604, EN 12453. The trained specialist/expert must
instruct the operator in the following:
- The operation of the drive and its dangers
- The handling of the manual emergency unlocking mechanism
- The regular maintenance, inspection and care, and his tasks
- The operator must instruct other users on the operation of the drive. After successful installation of the drive, the person responsible for the
installation of the drive in accordance with the Machinery Directive 2006/42/EC must issue the EC declaration of conformity for the gate system.
The CE mark and a type plate must be attached to the gate system. This is also obligatory in the process of retrofitting on a manually operated
gate. Further, a handover protocol and an inspection book must be filled in.
• The door should be balanced. Unmoving or stuck doors must be repaired. In an unbalanced state, garage doors, door springs, cables, discs,
brackets and rails are under extreme tension, which can lead to serious injury. Do not attempt to loosen, move or realign the door, but contact
service centre or a door professional.
• During the installation or maintenance of a door opener, no jewellery, watches or loose clothing should be worn.
• To avoid serious personal injury due to entanglement, remove all cables and chains connected to the door before installing the door opener.
• During installation and electrical connection, the local building and electrical regulations must be observed.
• Installation of the cable tension monitor is required according to EN12453.
• To avoid damage to very light doors (such as fibre glass, aluminium or steel doors), an appropriate reinforcement should be added. To do so,
contact the door manufacturer.
• The automatic safety reverse system should undergo a test. Upon contact with a 40 mm high barrier on the ground, the garage door MUST
return. Failure to properly adjust the door opener can result in serious personal injury from a closing garage door. Repeat test once a month and
make any needed changes.
• This system must not be installed in damp or wet areas.
• During operation, the gate should not under any circumstances obstruct public passageways.
• To remind all operators of the safe operation, in addition to the illuminated wall switch a warning sign to protect children should be affixed. The
warning signs about the risk of trapping should be placed in clearly visible spots.
• Children should be supervised to ensure that they do not play with the device. Do not allow children to operate push button(s) or remote(s).
• This device is not intended for use by persons (including children) with restricted physical, sensory or mental abilities or lack of experience and/
or knowledge, unless they are supervised by a person responsible for their safety or have received instruction in how to use the device.
• All barriers / locks are deactivated to avoid damage to the door.
• If necessary, installed control equipment MUST be mounted within sight of the door and out of reach of children. Children should not be allowed
to operate the buttons or remote controls. Misuse of the door opener can result in serious injury.
• The door opener should ONLY be used if the operator can see the entire door area and is assured that it is free of obstacles and the door
opener is set correctly. No one may pass through the door while it is moving. Children must not be allowed to play in the vicinity of the door.
• Use the manual release only for the separation of the carriage from the drive and – if possible – ONLY with the door closed. Do not use the red
handle to push the door up or pull it down.
• Before performing any repairs or removing covers, the door opener should be separated from the electric power supply.
The repairs and electrical installations may be performed only by an authorized electrician.
WARNING!
3 / en
CAUTION
Danger due to electric current or voltage