Quick Start - Tefcold BLC5-P Guide Rapide

8. QUICK START

8.1 DISPLAY
The upper display shows the temperature of the room probe.
The lower display shows the temperature of the inserts probe or the count down timer. To pass to the one
insert probe to the another one use the DOWN key.
DISPLAY

Temperature.

Timer or insert probe

Alarm and status icons.
If an icon or LED is on, the correspondent
function is enabled.
If an icon or LED is flashing, the
correspondent function is delayed.
8.2 KEYBOARD IN STAND-BY
HOW TO SELECT A CYCLE:
Push and release the
desired cycle is selected.
HOW TO START A CYCLE: Push and
release the START/STOP
(2). Il The correspondent yellow LED is
switched on..
HOW TO TEMPORARILY STOP THE
RUNNING CYCLE.
1. Press and release the
2. The compressor and the fan will be
stopped for the PAU time (see
parameters list) and the flashing
message "Stb" will be displayed.
3. To restart the cycle press and release
the key, the cycle will restart
from the some point at which it
interrupted.
4. In any case the cycle automatically
restarts after the PAU time.
HOW TO STOP A CYCLE: hold pushed
the START/STOP
yellow LED will be switched off.
1592006207 XB570L GB r1.1 26.08.2015
(3) key till the
button
key.
was
button (2) till the
XB570L 5 /20